** Profiles are 8′ 2″ long ** 

** Certain profiles are available in 10′ lengths **

– Certain profiles are available in a variety of finishes and thickness. Common finishes are polished chrome (ACG), brushed nickel (ATGB), Satin Aluminum (AE)

-Thickness to receive a tile usually ranges from 1/4″ to 1/2″ (60 = 1/4″, 80 = 5/16″, 100 = 3/8″, 125 = 1/2″)

(Call to check stock on the finish you are looking for and thickness needed)

 

Jolly / Schiene

Schluter^®-JOLLY is a finishing and edge-protection profile for the outside corners of tiled surfaces on walls. The vertical wall section of the profile provides a decorative finish and protects adjacent tiles. Other applications include transitions for dado coverings such as carpet, natural stone, or cold-cured resin coatings.

 

Rondec 

Schluter^®-RONDEC is a finishing and edge-protection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge.

 

Quadec 

Schluter^®-QUADEC is a finishing and edge protection profile for tiled edges and outside corners of tiled surfaces, and is distinguished by its squared reveal surface.

 

Finec

Schluter^®-FINEC is a finishing and edge-protection profile for the external edges of tile coverings or mosaics. The finishing leg of the profile protects the covering edges from mechanical damage, and features a very slim, elegant reveal.

 

Reno-T

Schluter^®-RENO-T is designed to provide transitions between existing, same-height, hard surface floor coverings, primarily in retrofit applications

 

Reno-TK

Schluter^®-RENO-TK is designed to protect tile edges and provide a smooth transition from tile coverings to floor coverings at lower elevations, typically carpet.

 

Reno-V

Schluter^®-RENO-V is designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations.

 

Reno-Ramp-K

The Schluter^®-RENO-RAMP profile is designed for new floor constructions, to create a smooth transition between tile coverings and floor coverings at lower elevations. The RENO-RAMP-K profile is designed to be bonded to existing floor coverings.

 

Reno-U

Schluter^®-RENO-U is designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations by abutting both surfaces.

 

Rondec-STEP

Schluter^®-RONDEC-STEP is a finishing and edging profile for ceramic tile and dimension stone installations on countertops and stairs. The top of the profile features a symmetrically rounded edge that matches the RONDEC profile, while the vertical leg of the profile hides the exposed edge of the sub-assembly.

 

Dilex

Schluter^®-DILEX-AHK is a cove-shaped profile with a single anchoring leg that provides an attractive, clean, and maintenance-free alternative for inside wall corners, and countertop/backsplash and floor/wall transitions.